014: 50MHz 2SC1306 (2SC6144) single for QRP

 ポータブル機のTR1300やIC502が世に出た70年代半ば以降、50MHzSSBもトランジスタファイナルが当たり前になった。NECの2SC1306や1307は値段も手頃で6mでも安定したパフォーマンスを発揮したから重宝がられ、QRP/ポータブルなら1306、10W固定機は1306-1307コンビが自作機のファイナルに選ばれることが多かった。殊に2SC1306は真空管時代の6AR5の如く、「HF~50MHzみんなの1Wパワー素子」的存在になっていたと思う。

 自分も最初の6mSSB送信機(当ギャラリーTX,RX-002)終段に2SC1306を選んでLC同調型の狭帯域アンプを作ったが、時に自己発振に悩まされた。今回同調コイルを空芯ソレノイド→トロイダルコイルに変更してみたら、同調点如何に関わらず至極安定に動作し、自己発振の兆候さえ感じられない。たとえ回路インピーダンスが低くても入出力の結合を過少評価してはならぬと、改めて教えられた気分である。

 その2SC1306はとうの昔にディスコンになり、最近は代替品を探すにも苦労する。手持ちの中からスペックの類似した2SC6144(Pc25W、fT330MHz、VCEO50V, SANYO)を選び、1306と付け替えてテストしてみた。その結果1306と同等の0.5Wドライブ→出力5.6Wを得ることができたが、元々PWMなどパルス波形の増幅用素子らしくチップが華奢で、連続キャリア数分でブレークダウン。貫通電流なのかC-E導通状態で昇天している。数個やってみたが結果は同じでdutyの高い使い方は馴染まないことが分かった。

いま新しく作るなら、バイポーラではなくpower MOS-FETの方が選択肢も広くて良いと思う。製作は1977年。2SC6144テストは2019年に実施。

2SC1306 single 50MHz QRP power amplifier, DC13.5V 0.3A, Po 2.7W (0.25Wdrive) , gain 10dB, η=63%Naked spurious -30dB (100MHz), -42dB (150MHz)


After TR1300 and IC502 were launched in the middle of 70s, a transistor final also became proper even in the 50MHz SSB transceiver. Because the performance was FB still on 50MHz and the price was reasonable, 2SC1306 of NEC was often chosen as the final for the QRP/portable use. (2SC1306-2SC1307 combination was suitable for the 10 W final.) It seemed to be everybody’s one watt final device like 6AR5 was in the old vacuum tube ages. So I chose 2SC1306 too as the final of my first 6mSSB transmitter and made a narrow band type of amplifier, but I was often disturbed by self-oscillation.

I changed the coil this time (just forty years after the original making) from traditional type to toroidal coil, it works FB with good stability and I can’t find even any sign of self-oscillation. It means that I am not supposed to underestimate the electromagnetic coupling of input/output even if the circuit impedance is low.

As 2SC1306 was put into the disconnected position all the while before, it’s not easy to look for the substitution. 2SC6144 of similar specification (Pc25W, fT330MHz and VCEO50V, made by SANYO) was picked from my parts box, and was changed for 2SC1306 and tested recently. As a result, I could get 5. 6W of output with 0.5W drive, which is almost equal to 2SC1306. But when a continuous carrier was taken out for five to six minutes, it’s been blown. I changed the transistor and tried again, but the result was same. The transistor is originally a device for pulse use like PWM, and seems to be delicate.

If a power amplifier is made newly now, I'd like to recommend a power MOS-FET for the device. Making was in 1977. 2SC6144 test was in 2019.

2SC1306 single 50MHz QRP power amplifier, DC13.5V 0.3A, Po 2.7W (0.25W drive), gain 10dB, η=63% Naked spurious -30dB (100MHz), -42dB (150MHz)

 

 

<<PREV _____ NEXT>>

2020年01月02日