これはARRLのハンドブックにあった同軸キャビティ型のアンプである。AO10 Bモード用に50Wのパワーが必要となり、JA0BZC矢花さんから貰ったアルミケース余剰品を使って早速リニアアンプに仕立てた。基本的にはオリジナル設計をリスペクトして作ったが、プレート同調だけはディスクスクリュー構造を止めてK2RIWと同じフラッパー同調方式にした。ロスが減り、プレート効率が若干良くなったと記憶している。
完成後はAO10 Bモード向けに一年間安定に稼働してくれた。ファイナルは4X150A, 4CX250Bでも動作確認したが4F15Rと大差はなかった。1983年製作。
Ep 800V, Esg 250V, AB1 class, Pout 60W, η=55%
This is a linear amplifier of coaxial cavity structure which was introduced
in the ARRL handbook. As I needed 50W power for AO10B work, I made the
complete amplifier immediately using the surplus aluminum case offered
with good intent from JA0BZC. The disk and screw structure was canceled
and the same flapper tune method as K2RIW amplifier was adopted only for
the plate tune circuit. Therefore the loss decreased and the plate efficiency
improved.
After completion, it was running with good stability for one year for AO10B
service. As for the final, neither 4X150A nor 4CX250B were very different
from 4F15R though had confirmed the operation condition. Making was in
1983.
Ep 800V, Esg 250V, AB1 class, Pout 60W, η=55%